BIOS Setting Do Not Fully Support the Boot Device FIX

BIOS Setting Do Not Fully Support the Boot Device FIX.

Assuming, you are having a problem with a new or relatively new build, check the HDD for connection issues.

This solution requires you to open the computer and disconnect and reconnect the hardware inside. Proceed only if you know what you are doing or take the computer to a hardware technician to perform the procedure.

If this is a new or relatively new build, check the HDD for connection issues. Open the computer and disconnect the SATA cable from the HDD and motherboard. Also, disconnect all the power from the HDD and leave the components idle for a few minutes. Now plug all the cables and connect the hard drive to your motherboard. Boot the computer and see if the issue is resolved.

If that does not work, try plugin the HDD to a different SATA port on the MOBO to see if that helps.

Open the computer and disconnect the SATA cable from the HDD and motherboard.

Also, disconnect all the power from the HDD and leave the components idle for a few minutes.

Now plug all the cables and connect the hard drive to your motherboard.
Turn on the computer and check for any improvements.

If that does not work, try plugin the HDD to a different SATA port on the motherboard to see if that helps.

In today’s ttuorial, we will attempt to show you how to resolve the issue The current BIOS setting do not fully support the boot device that you might encounter on your Windows 10 computer.

This tutorial will apply for computers, laptops, desktops,and tablets running the Windows 10 operating system (Home, Professional, Enterprise, Education) from all supported hardware manufactures, like Dell, HP, Acer, Asus, Toshiba,Lenovo, and Samsung).